EXSYS EX-3515 Manuel télécharger pdf (Page 8)

2-Port SATA3 RAID/HyperDuo PCIe Card

sure to press <F10> in the main screen. Press <Y> to confirm or

<N> to cancel.

9. Now, you may proceed to create the SATA driver diskette (for

AHCI mode) and the installation of the SATA driver and

operating system

6.2 Delete the Disk Array:

To deleted the existing array, select the array on the main menu

(example: VD 0: New_VD) and press <Enter> to display the Delete

option. Press <Enter>. When prompted, press <Y> to confirm or <N>

to cancel.

With the Marvell Storage Utility (RAID GUI), you can setup a disk

array or view the current array status in the operating system. To

install the utility, insert the supplied driver CD (folders as the following

picture).

Please follow the following steps:

1. Run the driver installer (drvSetup.exe) in the folder

\SATA3\88SE9130\Drivers to install the RAID drivers

2. Reboot the system to let the drivers take effect.

3. Run the RAID GUI installer

(\SATA3\88SE9130\Utility\MRUSetup.exe) to install the RAID

Utility.

Note:

After the installation, you must login the utility with the

same account name and password that you use to login the

operating system. If you did not set the account password before,

click Login to enter the Marvell Storage Utility (MSU) directly.

7. Installing RAID Drivers and GUI (MSU)

1 2 3 4 5 6 7 8 9 10

Pas de commentaire

EXSYS EX-3515 Manuel Page 8